From: Tim Fletcher (tim@fletchmail.net)
Date: Fri Apr 25 2003 - 16:37:24 GMT-3
To complicate things even more, it seems that it is feature set dependent.
As Leo indicated, at least on some versions/platforms you do need enterprise.
2500/12.1.5T9
IP only: 5
IP plus: 5
Enterprise: 198
-Tim Fletcher #11406
At 11:59 AM 4/25/2003 -0700, Tony Schaffran wrote:
>One further correction!
>
>It is dependant on the version of IOS and not the feature set.
>
>I have a 2511 running 12.0 that will only allow 5 vty ports and I have
>another 2511 running 12.1 that will allow 182 vty ports.
>
>I know I have responded a lot to this string. I hope this clears it up for
>most of you. I have actually been wondering this myself for some time and
>have never researched it fully until now.
>
>Thank you for your time.
>
>
>
>Tony Schaffran
>Network Analyst
>CCIE #11071
>CCNP, CCNA, CCDA,
>NNCSS, NNCDS, CNE, MCSE
>
>www.cconlinelabs.com
>"Your #1 choice for Cisco rack rentals."
>
>
>----- Original Message -----
>From: "Tim Fletcher" <tim@fletchmail.net>
>To: "Leo Song" <lsong@dataphile.ca>; "'Tony Schaffran'"
><tschaffran@cconlinelabs.com>; "'hoon'" <urlee21@kornet.net>;
><ccielab@groupstudy.com>
>Sent: Friday, April 25, 2003 10:29 AM
>Subject: RE: increasing number of line vty in 2511???
>
>
> > I don't think you need enterprise to do this, I think any version will do.
> >
> >
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fter
>sv_c/dcdpt.htm#1001764
> >
> > -Tim Fletcher #11406
> >
> > At 10:55 AM 4/25/2003 -0400, Leo Song wrote:
> > >Yes I do.
> > >
> > >System image file is "tftp://207.194.137.200/c2600-jk2s-mz.121-16.bin"
> > >
> > >dsltorrt6b>en
> > >Password:
> > >dsltorrt6b#conf t
> > >Enter configuration commands, one per line. End with CNTL/Z.
> > >dsltorrt6b(config)#line vty 0 100
> > >dsltorrt6b(config-line)#
> > >
> > >
> > >Leo
> > >
> > >
> > >-----Original Message-----
> > >From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
> > >Sent: Friday, April 25, 2003 10:39 AM
> > >To: Leo Song; 'hoon'; ccielab@groupstudy.com
> > >Subject: Re: increasing number of line vty in 2511???
> > >
> > >What does the Enterprise version give you?
> > >
> > >You cannot increase the number of VTY ports. If you need additional
> > >connections through a terminal server, a 2511 in this case, you can
> > >telnet
> > >directly to the TTY port you need access to. This will allow you to
> > >have
> > >more than 5 connections through a terminal server.
> > >
> > >
> > >
> > >Tony Schaffran
> > >Network Analyst
> > >CCIE #11071
> > >CCNP, CCNA, CCDA,
> > >NNCSS, NNCDS, CNE, MCSE
> > >
> > >www.cconlinelabs.com
> > >"Your #1 choice for Cisco rack rentals."
> > >
> > >
> > >----- Original Message -----
> > >From: "Leo Song" <lsong@dataphile.ca>
> > >To: "'hoon'" <urlee21@kornet.net>; <ccielab@groupstudy.com>
> > >Sent: Friday, April 25, 2003 6:49 AM
> > >Subject: RE: increasing number of line vty in 2511???
> > >
> > >
> > > > Upgrade to IOS Enterprise version.
> > > >
> > > > Leo
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > >Of
> > > > hoon
> > > > Sent: Friday, April 25, 2003 6:00 AM
> > > > To: ccielab@groupstudy.com
> > > > Subject: increasing number of line vty in 2511???
> > > >
> > > > hi group,
> > > > is there anyone knows how to increase the number of line vty more than
> > >5
> > > > (line vty 0 4)?
> > > > Should I upgrade IOS version to do this?? (the version now is 12.0(18)
> > >)
> > > >
> > > > Thank you in advance.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:07 GMT-3