From: Peter (peter@cyscoexpert.com)
Date: Wed Apr 23 2003 - 17:47:09 GMT-3
You have IP Plus version of software. You need Enterprise.
_____________________________
Peter
#7247 (R&S, Security, C&S)
CyscoExpert Corp.
4433 W. Touhy Ave. Suite 410
Lincolnwood, IL 60712
Phone (847) 674-3392
Toll Free (866) CyscoXP (297-2697)
Fax (847) 674-2625
----- Original Message -----
From: "Jeongwoo Park" <jpark@wams.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 23, 2003 2:42 PM
Subject: Can't start ISIS
> First time for me I practice isis in my router.
> It doesn't seem to run isis.
>
> r3#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> r3(config)#router isis
> r3(config)#n?
> ncia netbios no ntp num-exp
>
> r3(config)#n
>
> r3(config)#clns router
> ^
> % Invalid input detected at '^' marker.
>
> r3(config)#
>
> r5#sh ver
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(19), RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Tue 04-Mar-03 13:08 by kellythw
> Image text-base: 0x80008088, data-base: 0x80CF75E8
>
> ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
>
> r5 uptime is 1 day, 23 hours, 38 minutes
> System returned to ROM by power-on
> System image file is "flash:c2600-is-mz.121-19.bin"
>
> cisco 2610 (MPC860) processor (revision 0x203) with 26624K/6144K bytes of
> memory.
> Processor board ID JAD05400D0D (3721871652)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> What am I missing?
>
> Thanks,
>
> JP
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:03 GMT-3