From: Nguyen Hoang Long (ng-hlong@hn.vnn.vn)
Date: Wed Apr 23 2003 - 06:58:36 GMT-3
+ Question1 :
Max rate = CIR+ CIR*BE/BC
+ Question2:
End router does not set DE when rate is above CIR, it depends on Frame-relay
switch.
on end router, you can only set DE based-on input interface & protocol
DE set means "de=1"; however, probably you don't have to consider between
"0" and "1", there's no command that ask you to specify "0,1"
----- Original Message -----
From: "midaskim" <janggulove@hanmail.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 23, 2003 2:04 PM
Subject: Traffic Shaping Cir / BC / BE ?
> Hi all.
>
> I'm working Traffic Shaping.
>
> I know FRTS was treated several times in this group.
>
> But, I can't find the answer for my question.
>
> <Question 1>
>
> I don't know exactly when packets will drop
>
> When packet rate reach CIR+BC+BE value , DROP ???
>
> or
>
> When packet rate reach CIR+BE value , DROP ???
>
> <Example>
>
> -if)# traffic-shape rate 32000 24000 24000 1000
>
> When packet will be dropped ??????
>
> 80000 (32000+24000+24000) is drop point ???
>
> or
>
> 56000 (32000+24000(BE)) is drop point ???
>
> <Question 2>
>
> mincir 16kbps ; measure interval is 125ms; set DE when 48kbps;
>
> drop when 64kbps
>
> <Config>
>
> map-class frame-relay ccie
>
> frame-relay mincir 16000
>
> frame-relay cir 48000
>
> frame-relay bc 6000
>
> frame-relay be 10000
>
> Is this correct ???
>
> "Set DE" means "DE=0" ??
>
> When packet exceed CIR, DE bit will set "DE=0" ????
>
> When packet exceed BC, DE bit will set "DE=1" ????
>
> I'm so confusing.
>
> Thanks in advance.
>
> [IMAGE]
>
> [IMAGE]
>
> [IMAGE]
>
> midaskim
>
> [IMAGE]
>
> [IMAGE]
>
> "?l8. @NEM3], Daum" http://www.daum.net !:Fr;}>24B 9+7a GQ8^@O3]!;
>
> [IMAGE]
>
> "92003 4Y@=@G 3/"7
> !Z?M GT22GO4B ?A$0z 3"@G GQ9YEA C`A&
>
> [IMAGE]
>
> [IMAGE]
>
> GQ8^@O3] =:FTA&7N =C=:E[
> =:FT >x4B FmAvGT! GQ8^@O3] FmAvGT!
>
> [IMAGE]
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:02 GMT-3