From: lg01 (lg01@myway.com)
Date: Tue Apr 22 2003 - 09:34:25 GMT-3
Hi group,
R4
/ |
R5 | (shared eth between r4 & r8)
\ |
R8
This is a hub & spoke topology, where r5 is hub, while r4 & r8 are spokes.
Now on r5, it sees the r4 / r8 ethernet's as:-
D 172.168.48.0/24 [109/2195456] via 172.168.200.8, 00:00:09, Serial0.2
[109/2195456] via 172.168.200.4, 00:00:09, Serial0.2
Now, if I want to increase the EIGRP metric of both routes to say, 2200576, I know that I can do this by using an "incoming" offset-list on r5
offset-list <x> in 5120 , where 2200576 - 2195456 = 5120
However, if I want to accomplish this by modifying the EIGRP Delay metric on both r4 r8, is there any formula or calculations that I could done so I know what value to put in for "Delay" metric in order to get 2200576?
Regards,
H.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:00 GMT-3