From: cannonr (cannonr@attbi.com)
Date: Mon Apr 21 2003 - 20:04:25 GMT-3
I have routers at work with 12.2 configured with service-policy out in the
frame map class. Just took a look at a 12.1 router and the option wasn't
there. It doesn't look like its available until either 12.2 or maybe a 12.1
T train.
----- Original Message -----
From: "Jason Cash" <cash2001@swbell.net>
To: <ccielab@groupstudy.com>
Sent: Monday, April 21, 2003 4:12 PM
Subject: Map-class frame XXX - when is service-policy output available?
> I have been told in prior emails to apply a policy map to the 'map-class
> frame-relay' portion of the config. However, I am unable to see this
> option.
>
> r4(config)#map-class frame-relay voice
> r4(config-map-class)#?
> Static maps class configuration commands:
> default Set a command to its defaults
> exit-class Exit from static map class configuration mode
> frame-relay Configure Map parameters
> help Description of the interactive help system
> no Negate a command or set its defaults
>
> At what point is this available as I swore I saw it once in the past?!
>
> Also, what is the difference in configuring it this way:
>
> class-map data
> match access-group 106
> class-map voice
> match access-group 105
> !
> policy-map voice
> class voice
> priority 80
> class data
> priority 48
> !
> interface Serial0
> ip address 150.50.100.5 255.255.255.224
> encapsulation frame-relay
> no ip mroute-cache
> load-interval 30
> service-policy output voice
> frame-relay traffic-shaping
> frame-relay class voice
> frame-relay map ip 150.50.100.2 501 broadcast rtp header-compression
> active connections 256
> frame-relay map ip 150.50.100.5 501
> frame-relay map ip 150.50.100.6 501 broadcast
> no frame-relay inverse-arp
> !
> map-class frame-relay SHAPE
> frame-relay cir 128000
> frame-relay bc 1280
> frame-relay be 0
> no frame-relay adaptive-shaping
>
> As opposed to configuring it like this (when it is available):
>
> class-map data
> match access-group 106
> class-map voice
> match access-group 105
> !
> policy-map voice
> class voice
> priority 80
> class data
> priority 48
> !
> interface Serial0
> ip address 150.50.100.5 255.255.255.224
> encapsulation frame-relay
> no ip mroute-cache
> load-interval 30
> frame-relay traffic-shaping
> frame-relay class voice
> frame-relay map ip 150.50.100.2 501 broadcast rtp header-compression
> active connections 256
> frame-relay map ip 150.50.100.5 501
> frame-relay map ip 150.50.100.6 501 broadcast
> no frame-relay inverse-arp
> !
> map-class frame-relay voice
> frame-relay cir 128000
> frame-relay bc 1280
> frame-relay be 0
> service-policy output voice
> no frame-relay adaptive-shaping
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:00 GMT-3