From: Faris B. (farisb@globalreach.net)
Date: Mon Apr 21 2003 - 16:32:25 GMT-3
"Show route-map" might help you troubleshot your policy based routing.
Thanks,
Faris
CCIEforums.com
----- Original Message -----
From: "Tarun Pahuja" <tpahuja@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, April 21, 2003 11:20 AM
Subject: show command for PBR
> Folks, Is there a show command which can show how policy based routing is
> defined on an interface? I used the following commands but never got an
> output after configuring PBR on an interface. How do i know PBR is
> working? show policy-map aaa , show interface interface eth 0. They both
> gave me no results. Here is my configuration. Interface eth 0ip address
> 20.20.20.20 255.255.255.0ip policy route-map aaa route-map aaa permit 10
> match ip address 2
> set ip precedence 2
> set ip next-hop 10.10.10.10
> access-list 2 permit any Thanks
>
> ------------------------------------------------------------------------
>
> Help STOP SPAM with the new MSN 8 and get 2 months FREE*
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:00 GMT-3