From: Alec Pun (clapun@graduate.hku.hk)
Date: Sun Apr 20 2003 - 13:01:09 GMT-3
thanks all..... finally I fixed it by disabling all ip routing protocols in
the STUB router.
----- Original Message -----
From: "cannonr" <cannonr@attbi.com>
To: "Alec Pun" <clapun@graduate.hku.hk>; "CCIE LAB (E-mail)"
<ccielab@groupstudy.com>
Sent: Sunday, April 20, 2003 11:13 PM
Subject: Re: ODR problem
> Post configs. Also make sure that no routing protocol is running on the
ODR
> router.
> ----- Original Message -----
> From: "Alec Pun" <clapun@graduate.hku.hk>
> To: "CCIE LAB (E-mail)" <ccielab@groupstudy.com>
> Sent: Sunday, April 20, 2003 9:14 AM
> Subject: ODR problem
>
>
> > Hi group,
> >
> > Any good link to explain ODR configuration ?
> >
> > I have setup two routers connected by ethernet. CDP is enabled as it
can
> be
> > verified by the show cdp neighbor command. "router odr" is confiured in
> the
> > hub router. Yet, the subnet of the stub router can not be learned in
the
> > hub router (show ip route odr result is always empty). Any idea ?
> >
> > thanks
> > alec
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3