RE: auto-rp configuration

From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Fri Apr 18 2003 - 13:57:13 GMT-3

• Next message: Richard Davidson: "RE: Quick method for testing reachability of all interfaces of"
• Previous message: mary john: "one way chap auth for isdn"
• Maybe in reply to: Pita40: "auto-rp configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

That's one piece of it. "...to enable auto-rp." --- couple of other
steps; like configuring the candidate RP.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fiprmc_r/mult/1rfmult2.htm#1020076

thanks,
scott

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Pita40
Sent: Friday, April 18, 2003 9:22 AM
To: ccielab@groupstudy.com
Subject: auto-rp configuration

Is configuring RP mapping agent the way to enable auto-rp.

Router(config)# ip pim send-rp-discovery scope ttl-value

Thanks

P

• Next message: Richard Davidson: "RE: Quick method for testing reachability of all interfaces of"
• Previous message: mary john: "one way chap auth for isdn"
• Maybe in reply to: Pita40: "auto-rp configuration"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:58 GMT-3