RE: access-list used for filtering routes

From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Fri Apr 18 2003 - 00:43:28 GMT-3

• Next message: Leo Song: "PIX-PIX VPN Tunnel & Static NAT Access"
• Previous message: Brian Dennis: "RE: Extended access-list question"
• Maybe in reply to: Richard Davidson: "access-list used for filtering routes"
• Next in thread: Richard Davidson: "RE: access-list used for filtering routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

access-list 110 deny ip 10.1.1.0 0.0.0.255 host 255.255.255.0
-Or-
access-list 110 deny ip 10.1.1.0 0.0.0.255 255.255.255.0 0.0.0.0

If you use example #2 above the IOS will convert it to look like example
#1

Thanks,
Scott

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Richard Davidson
Sent: Thursday, April 17, 2003 9:40 PM
To: groupstudy
Subject: access-list used for filtering routes

Can anyone confirm for me that these will match the
same addresses. I can get the prefix-list to match
but the acl will not.

ip prefix-list deny 10.1.1.0/24 le 24
access-list 101 de ip 10.1.1.0 0.0.0.0 255.255.255.0
0.0.0.0

I am trying to match only 10.1.1.0/24.
Rich

• Next message: Leo Song: "PIX-PIX VPN Tunnel & Static NAT Access"
• Previous message: Brian Dennis: "RE: Extended access-list question"
• Maybe in reply to: Richard Davidson: "access-list used for filtering routes"
• Next in thread: Richard Davidson: "RE: access-list used for filtering routes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:57 GMT-3