From: wsqccie@hotnail.com
Date: Thu Apr 17 2003 - 16:45:02 GMT-3
it is worked for all interfaece not just for loopback?
----- Original Message -----
From: "<B3U$/" <johnson_liu@corp.giga.net.tw>
To: "Brian Dennis" <brian@labforge.com>; "Fan Shan" <shanf@public.jn.sd.cn>; "Ccielab@Groupstudy.Com" <ccielab@groupstudy.com>
Sent: Thursday, April 17, 2003 1:51 PM
Subject: RE: What is the function of "passive-interface" command in ISIS?
> Thanks for the info.
>
> I have a another problem, if I want to include interface loopback0 in ISIS, should I use passive-interface loopback0 or router isis under interface loopback 0 ?
> Which solution is the proper one ?
>
> --
> Gigamedia Inc.
> Johnson Liu
> CCNP/CCDP/CCIE#11440
>
> -----Original Message-----
> From: Brian Dennis [mailto:brian@labforge.com]
> Sent: Thursday, April 17, 2003 10:16 AM
> To: 'Fan Shan'; 'Ccielab@Groupstudy.Com'
> Subject: RE: What is the function of "passive-interface" command in ISIS?
>
>
> From the Doc CD:
>
> For Intermediate System-to-Intermediate System (IS-IS), this command instructs IS-IS to advertise the IP addresses for the specified interface without actually running IS-IS on that interface. The no form of this command for IS-IS disables advertising IP addresses for the specified address.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> Director of CCIE Training and Development - IPexpert, Inc.
> Mailto: brian@ipexpert.net
> Toll Free: 866.225.8064
> Outside U.S. & Canada: 312.321.6924
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Fan Shan
> Sent: Wednesday, April 16, 2003 6:19 PM
> To: Ccielab@Groupstudy.Com
> Subject: What is the function of "passive-interface" command in ISIS?
>
> What is the function of "passive-interface" command in ISIS?
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:56 GMT-3