From: FATHALLAH (sfathallah@mail.cbi.net.ma)
Date: Thu Apr 17 2003 - 09:01:54 GMT-3
Hi brian,
Can you please help me in this questions :
question 1- In frame relay with subinterface, after defining a custom,
priority queueing or policy map ( CBWFQ ) where should I apply it. in
subinterface or physical interface. supose that we have not to use map-class
fr.
question 2 : where should I apply "ip rtp header-comp" if I have
subinterface.
Question2- is there any way to apply a queueing methode to a single PVC
exemple: CQ ) without using map-class
Question 3 - in FRTS, I know there is two configuration way to handle the
trafic shape :
1sr- configure frame-relay cir, frame-relay mincir, frame-relay bc,
frame-relay be
2nd- configure Frame-relay trafic-rate min max
for the seconde way i don't have any probleme: min = mincir and max = mincir
+ EIR. it is write?
for the first my probleme is the bc and be. is the BE total number of bit to
transmite under the BC. or BE is the maximum number of bit to transmite in
frame PVC. ( in an other way. it is the execess or the adition of mincir to
the execess )
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3