From: Brian McGahan (brian@cyscoexpert.com)
Date: Wed Apr 16 2003 - 22:56:25 GMT-3
Niksa,
With dialer-watch, there is no need for a dialer-list to specify
interesting traffic. The dialer-watch list is the interesting traffic
instead.
The config for dialer-watch with IS-IS will be the same as with
any other IP routing protocol, but don't forget to map CLNS on the
interface. Remember that with any multipoint non-broadcast interface,
you need a static protocol mapping for any protocol you are running on
that interface. Since IS-IS is part of the CLNS stack, not the IP
stack, you must do a dialer map for CLNS.
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Toll Free: 866-CyscoXP
Outside US: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Niksa Tomulic
> Sent: Wednesday, April 16, 2003 6:32 PM
> To: ccielab@groupstudy.com
> Subject: ISIS with dialer watch?
>
> Hi list
> Is it possible to use dialer watch scenario with ISIS?
> I remember seeing some posts, but God himself can't find them when I
> need them
>
> dialer-list 1 protocol clns_is permit
> Will define right traffic as interesting, but how to stop it being up
> all the time?
>
> thnx
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3