From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Wed Apr 16 2003 - 22:40:38 GMT-3
hm..I think you're mixing AD with hop count. Hop count is the "metric" of rip. And if you want to change that in DV protocol as far as I remember is to use the command offset-list.
router ei x
offset-list <acl>in|out <offset value>
end
Regards,
Donny
Pieter Scheepers -
CPX SS To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
<PieterSC@ComparexAf cc:
rica.co.za> Subject: Show Stopper ?
Sent by:
nobody@groupstudy.co
m
16-04-2003 21:08
Please respond to
Pieter Scheepers -
CPX SS
Here is a question from Brian Dennis which I dug up from the archives. I
did not see someone post an answer to it.
Care to try ?
Give all class "A" networks received via RIP from 10.2.1.1 an additional hop
count of 2 with the exception of the 2.0.0.0/8 route. Use a maximum of 2
access-list statements for this task.
Then more !!
Give all class "A" classful networks received via RIP from 10.2.1.1 an
additional hop
count of 2 with the exception of the 2.0.0.0/8 route. Use a maximum of 2
access-list statements for this task.
I tried:
router rip
distance 2 10.2.1.1 0.0.0.0 1 or should it be
distance 2 10.2.1.1 255.255.255.255 1
access-list 1 permit 0.0.0.0 127.255.255.255
access-list 1 deny 2.0.0.0 0.255.255.255
The second one:
router rip
distance 2 10.2.1.1 0.0.0.0 100
access-list 100 permit 0.0.0.0 127.0.0.0 host 255.0.0.0
access-list 100 deny 2.0.0.0 0.255.255.255
Regards
Pieter Scheepers
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3