From: Matthew Poole (matthew.poole@blueyonder.co.uk)
Date: Wed Apr 16 2003 - 19:34:33 GMT-3
Resent - never appeared (sorry if it appears later) ;-)
----- Original Message -----
From: "Matthew Poole" <matthew.poole@blueyonder.co.uk>
To: "Scot Peter" <scotsman@rediffmail.com>; <ccielab@groupstudy.com>
Sent: Wednesday, April 16, 2003 7:43 PM
Subject: Re: Custom-Q to CBWFQ convertion
> Looking through my 1000's of archived emails I found this post which seems
> to come up regularly - but never seems to get answered sufficiently.
>
> In this post we have 3 queue's one of which is "default". The 3 queue's
> have byte counts of 1000,1000 and 2000 respectively so I assume we want
them
> to have "bandwidth percents" in our policy-map of 25,25 and 50%
> respectively.
>
> I realise we have to create class-maps to classify the traffic, policy map
> to assign bandwidth, queue limit, wred etc and apply the policy map to an
> interface with a service policy.
>
> A couple of questions,
>
> 1. Do we assume that all overhead, i.e. routing, cdp etc will enter the
> default queue, which has 50%?
> 2. Does this mean we can change our max-reserved bandwidth to 100% as the
> 25% reserved by default will go in the default queue (class-default)?
>
> my config would be something like this - n.b. no router handy so it's off
> the top of my head, the commands may not be exact!
>
> ip cef
> !
> class-map match-all TELNET
> match protocol telnet
> !
> class-map match-all FTP
> match protocol FTP
> !
> policy-map CQ2CBWFQ
> class TELNET
> queue-limit 100
> bandwidth percent 25
> class FTP
> banndwidth percent 25
> queue-limit 100
> class class-default
> bandwidth percent 50
> queue-limit 100
> !
> int s0
> service-policy output CQ2CBWFQ
> max-reserved bandwidth 100
> end
>
> I've spent the whole day watching every QOS VOD I could find on PEC and
> reading doc's - not the most interesting of video's!! Though the DQOS one
> is good.
>
> I would appreciate somebody confirming or ripping to pieces my 100%
> bandwidth theory.
>
> Cheers
>
> Mat.
>
> ----- Original Message -----
> From: "Scot Peter" <scotsman@rediffmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, March 31, 2003 12:58 PM
> Subject: Custom-Q to CBWFQ convertion
>
>
> > Hello Group,
> > I want to convert the below Custom-queue into CBWFQ.
> > Request you all to throw some suggestions...
> >
> > queue-list 1 protocol telnet 0
> > queue-list 1 protocol ftp 1
> > queue-list 1 default 2
> > queue-list 1 queue 0 byte-count 1000 limit 100
> > queue-list 1 queue 1 byte-count 1000 limit 100
> > queue-list 1 queue 2 byte-count 2000 limit 100
> >
> > int s0
> > custom-queue-list 1
> >
> > Regards
> > Pet
> > _______________________________________________________________________
> > Odomos - the only mosquito protection outside 4 walls -
> > Click here to know more!
> >
>
http://r.rediff.com/r?http://clients.rediff.com/odomos/Odomos.htm&&odomos&&w
> n
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3