From: Brian Dennis (brian@labforge.com)
Date: Wed Apr 16 2003 - 13:12:51 GMT-3
Feature Overview
You can now issue EXEC-level Cisco IOS commands (such as show, clear,
and debug commands) from within any configuration mode (such as global
configuration mode) by issuing the do command followed by the desired
EXEC command.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_
guide09186a008012258b.html
VPN_Beta_Test#conf t
Enter configuration commands, one per line. End with CNTL/Z.
VPN_Beta_Test(config)#int fa0/0
VPN_Beta_Test(config-if)#do sho run int fa0/0
Building configuration...
Current configuration : 96 bytes
!
interface FastEthernet0/0
ip address 172.16.3.47 255.255.255.0
duplex auto
speed auto
end
VPN_Beta_Test(config-if)#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:54 GMT-3