Re: MINCIR = CIR? (Was: Do you agree with this equation?)

From: MADMAN (dave@interprise.com)
Date: Wed Apr 16 2003 - 10:57:53 GMT-3

Mike Williams wrote:
> I know this sounds silly, but what is the purpose of MINCIR??!?!
> Unless everything I've ever learned about Frame Relay is wrong, CIR is a
> COMMITTED Information Rate, i.e. the bandwidth that's guaranteed to you
> as a customer with no drops during congestion. So why in the world
> would you ever configure a MINCIR that's isn't exacly the same as your
> CIR?!?!?

Not in Ciscos frame relay traffic shaping world! CIR is your line rate,
MINCIR is CIR, make sense no;)

   Dave

>
> Any input is appreciated.
> Mike W.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Joe Chang
> Sent: Wednesday, April 16, 2003 5:30 AM
> To: Jeongwoo Park; ccielab@groupstudy.com
> Subject: Re: Do you agree with this equation?
>
>
> Remember that the value of Be includes the value of Bc; Be is not an
> increment value over Bc.
>
> This may be more accurate:
>
> Bc = CIR * Tc
> Max Be = Access Rate * Tc
>
>
> ----- Original Message -----
> From: "Jeongwoo Park" <jpark@wams.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, April 16, 2003 6:17 AM
> Subject: Do you agree with this equation?
>
>
>
>>In FRTS;
>>
>>BC+BE=AP/8
>>Therefore, BE=AP/8-BC
>>
>>I would appreciate your input..
>>Thanks,
>>
>>JP
>
>
> 

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

I would rather have a German division in front of me than a French one 
behind me."
--- General George S. Patton

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:54 GMT-3