voice vlan

From: wsqccie@hotnail.com
Date: Wed Apr 16 2003 - 09:46:31 GMT-3

• Next message: Larson, Chris: "RE: MINCIR = CIR? (Was: Do you agree with this equation?)"
• Previous message: Pieter Scheepers - CPX SS: "Show Stopper ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hi, guys
   If I have installed a voice vlan in 3550. and now I want to assign cost value 2 to the packets who has owned a old cost value, how can i do?
   mls qos trust cos command can class packets with CoS,and will assign port default cos to untagged packets , Mls Qos cos value overidde command seems to assign a cos value to the port. As I know, this is no other comand to assign a value to a packets. Do I need a policy-map to do so?

   BTW, the below is my other configuration for the require for changing the COS of data and coice to 1 , pls correct if needed.

switchport trunk encapsulation dot1q
 switchport trunk native vlan 2
 switchport mode trunk
switchport voice vlan 200
no ip address
mls qos trust cos
spanning-tree portfast
mls qos cos 1
mls qos cos overide---->mandory the all cos both voice and data to 1
switchport priority extend cos 1---->assign cos 1 to ip data , is it useful for override is working?
mls qos cos trust

• Next message: Larson, Chris: "RE: MINCIR = CIR? (Was: Do you agree with this equation?)"
• Previous message: Pieter Scheepers - CPX SS: "Show Stopper ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:54 GMT-3