From: Peter (peter@cyscoexpert.com)
Date: Mon Apr 14 2003 - 16:00:14 GMT-3
If you are looking for instructions, then here you go:
http://www.cisco.com/en/US/partner/products/hw/switches/ps700/products_tech_
note09186a008015bfa6.shtml
As far as the config of layer 2 and layer 3 in native IOS after the
upgrade - if you know how to do it on the Cat3550 EMI you should be OK.
_____________________________
Peter
#7247 (R&S, Security, C&S)
CyscoExpert Corp.
4433 W. Touhy Ave. Suite 410
Lincolnwood, IL 60712
Phone (847) 674-3392
Toll Free (866) CyscoXP (297-2697)
Fax (847) 674-2625
----- Original Message -----
From: "George Gittins" <g.gittins@edinburg.esc1.net>
To: <Ccielab@groupstudy.com>
Sent: Monday, April 14, 2003 11:51 AM
Subject: Cisco 6509 upgrade to ios based
> I currently have the cisco 6509 with Mfsc 2 card on it , but im looking
> for instructions on how to up grade it to an ios based switch and is I
> believe to a native mode? Right now its at a hybrid mode..I get them
> confused...
> I want to route vlans on it.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:52 GMT-3