From: Frank Jimenez (franjime@cisco.com)
Date: Mon Apr 14 2003 - 13:39:43 GMT-3
Not exactly sure what problem you are trying to solve here, but....
You might consider setting up a hunt group - for example....
dial-peer voice 1 pots
destination pattern 3000
port 1/1
preference 0
!
dial-peer voice 2 pots
destination pattern 3000
port 1/2
preference 1
!
That will ring port 1/1 if it's not busy, and will ring port 1/2 if 1/1 is busy.
More info:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c
/vvfpeers.htm#1250792
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of vlad
ogly
Sent: Monday, April 14, 2003 7:09 AM
To: ccielab@groupstudy.com
Subject: Trying to solve a tricky Voice problem
Is it possible to configure two POTS-FXS ports to
respond to the same DN? Ive been trying to find a
solution where one DN is dialed and it rings two
separate POTs (FXS) lines.
Thanks in an advance.
PS. I have tried two separate Dial-peers with the same
DN, but pointing to different POTS, yet only the first
FXS port rings.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:52 GMT-3