答复: ISIS and OSPF redistrubution

From: Lin Xiaodong (Linxiaodong@21Vianet.com)
Date: Sun Apr 13 2003 - 22:31:03 GMT-3

Next message: Donny MATEO: "RE: ACL Time Range with No Extra"
Previous message: liwei@gwtt.com: "GSR 12012"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

no, you don't need to do it :)

-----ee'i.d;6-----
ed;6d::: Tomikawa [mailto:h-tomikawa@syscomusa.com]
eif6i4: 2003e944f14f% 4:26
f6d;6d::: ccielab@groupstudy.com
d8;i": ISIS and OSPF redistrubution problem.

Hi.
I have a problem of ISIS and OSPF redistribution issue.
ISIS and OSPF boundary router is "R1".
ISIS is only enabled on R1's serial0 interface and OSPF is enabled on
ether0.
From other OSPF routers, all ISIS routes are redistributed on R1, except
serial0 of R1 network address.
In ISIS redistribution behavoir, Do I need to configure also
"redistrubute connected",
because in case of RIP or EIGRP, R1's serial0 network is redistributed
to OSPF without
"redistributed connected" statement.

Thanks.

Next message: Donny MATEO: "RE: ACL Time Range with No Extra"
Previous message: liwei@gwtt.com: "GSR 12012"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:52 GMT-3