From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Sun Apr 13 2003 - 08:50:55 GMT-3
case 1
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Alec Pun
Sent: Saturday, April 12, 2003 10:53 PM
To: ccielab
Subject: FR map broadcast keyword
Hi group,
Appreciate if someone can clarify the broadcast keyword in a FR map
statement. Take for an example, if the following commands are set in the
hub router :
interface Serial0/0
ip address 192.168.1.2 255.255.255.0
encapsulation frame-relay
ip ospf network point-to-multipoint
frame-relay map ip 192.168.1.1 221 broadcast
frame-relay map ip 192.168.1.3 223 broadcast
Does the broadcast keyword do either or both of the following actions :
1) local generated broadcast will be duplicated onto both DLCI
2) remote generated broadcast (say broadcast from spoke router) will also be
duplicated on other DLCI
My prelim. test seems to point out only case 1 is correct.
thanks a lot
alec
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:51 GMT-3