From: Emad (emad@zakq8.com)
Date: Sun Apr 13 2003 - 05:24:39 GMT-3
But I'm sending like anybody is sending about PIX firewall problems which is out of CCIE R&S scope , moreover , IPX still exists in R&S written exam , but at the end thanx a lot for ur help by sending me this URL
-----Original Message-----
From: Jonathan V Hays [mailto:jhays@jtan.com]
Sent: Sunday, April 13, 2003 2:19 AM
To: 'CCIE LAB (E-mail)'
Cc: Emad
Subject: RE: IPX ACls
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Emad
> Sent: Saturday, April 12, 2003 11:24 AM
> To: CCIE LAB (E-mail)
> Subject: IPX ACls
>
>
> Dear all,
> I don't have enough resources for IPX but I need to know
> (with an example) how I can permit or deny IPX Network range
> in IPX ACL? Thanx
>
>
Hey Emad!
The reason you are not getting responses to your repeated posts on help
with IPX is that the IPX protocol is no longer on the CCIE R&S Lab exam
- so most people don't care, since this list is focused on the lab exam.
If your post is a general IOS question on a topic that is not covered on
the lab exam you would be more likely to get responses by posting to the
Professional/Technical list.
Regarding IPX, you might check the Documentation CD for examples. There
are some good ones under this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
atipx_r/ipx/2rdipx1.htm#1017396
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:51 GMT-3