From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Sat Apr 12 2003 - 15:13:35 GMT-3
Rick
I would highly recommend defining your own router-ids -- just for the
reasons you specified. The only argument that I have heard against doing
this is a negative experience using OSPF router-id's with ISDN.
Router-id's are designations, not IP addresses. As such their
non-routability should not be a factor. If it is, then I would consider that
a bug in the IOS.
I your studies using OSPF and ISDN, try defining router-id's and see if you
have a problem. If you do, I would like to see your configs so I can lab it
up.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Phong Tran Tien
Sent: Saturday, April 12, 2003 1:19 AM
To: Rick; ccielab@groupstudy.com
Subject: RE: Router-ids in the lab
No problems, you can use your own router-ids for OSPF and BGP in your
real lab
#11285
-----Original Message-----
From: Rick [mailto:ccie_2003@hotmail.com]
Sent: Saturday, April 12, 2003 7:28 AM
To: ccielab@groupstudy.com
Subject: Router-ids in the lab
All,
I like using my own OSPF and BGP router-ids that help trouble-shoot
really
fast. Do you think they would count points off for using these?
For example:
r1 router-id 1.1.1.1
r2 router-id 2.2.2.2
* These are note routed in any, but just used as a router-ids.
Please give your advise. All advise is good advise.
Thanks,
Rick
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:51 GMT-3