From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Fri Apr 11 2003 - 02:30:47 GMT-3
Have you tried to clear the eigrp neighbor ? or restart the router (for my case restarting neighbor peering works most of the time).
Regards
Donny
"Jason Cash"
<cash2001@swbell. To: <ccielab@groupstudy.com>
net> cc:
Sent by: Subject: EiGRP metric - delay on serial
nobody@groupstudy
.com
11-04-2003 12:29
Please respond to
"Jason Cash"
I am trying to alter the metrics of a route in the IPE Lab 7. R2 is
rcv'ing routes from R5 and R6 via serial links. I change the delay on
the serial interfaces of R6 to have R2 prefer the route to R5, but it
has no effect:
r2#si
150.50.0.0/16 is variably subnetted, 7 subnets, 4 masks
D 150.50.4.0/24 [90/2733056] via 150.50.100.5, 00:00:07,
Serial0.256 R5
[90/2733056] via 150.50.100.6, 00:00:08,
Serial0.256 R6
D 150.50.7.0/25 [90/2195456] via 150.50.100.5, 00:00:18,
Serial0.256
[90/2195456] via 150.50.100.6, 00:00:18,
Serial0.256
D 150.50.5.64/27 [90/2707456] via 150.50.100.5, 00:00:08,
Serial0.256
[90/2707456] via 150.50.100.6, 00:00:08,
Serial0.256
Then change the delay on the serial link on R6:
r6#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r6(config)#int s1/0
r6(config-if)#delay 100000
r2#clear ip ro *
r2#si
150.50.0.0/16 is variably subnetted, 7 subnets, 4 masks
D 150.50.4.0/24 [90/2733056] via 150.50.100.6, 00:00:01,
Serial0.256
[90/2733056] via 150.50.100.5, 00:00:02,
Serial0.256
D 150.50.7.0/25 [90/2195456] via 150.50.100.6, 00:00:02,
Serial0.256
[90/2195456] via 150.50.100.5, 00:00:02,
Serial0.256
D 150.50.5.64/27 [90/2707456] via 150.50.100.6, 00:00:02,
Serial0.256
[90/2707456] via 150.50.100.5, 00:00:02,
Serial0.256
Changing the serial interface delay on S1/0 of R6 to had no affect! IS
something wrong here?
Serial1/0 is up, line protocol is up
Hardware is cxBus Serial
Internet address is 150.50.100.6/27
MTU 1500 bytes, BW 1544 Kbit, DLY 1000000 usec,
Now when I change the delay on the Ethernet interface (ingress path of
route) the metric is changed, but I thought all paths were considered
when tallying delay.
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3