From: boby2kusa (boby2kusa@hotmail.com)
Date: Thu Apr 10 2003 - 13:01:31 GMT-3
Look at the callmanager's trace output and see if the incoming call really
do have caller's information in. After all the call set-up had to go through
the CallManager.
----- Original Message -----
From: "Brian Sims" <BSims_1@msn.com>
To: "'Yinka Daramola'" <o_daramola@hotmail.com>; "'Brian Sims'"
<BSims_1@msn.com>; <ccielab@groupstudy.com>
Sent: Wednesday, April 09, 2003 7:15 AM
Subject: RE: IP Telephony Caller-ID problems
> Hi guys,
>
> I tried "connection plar opx", CLID still did not work. The VG200 is
running
> IOS 12.1(5)XM4 with FXO-M1 voice ports. I'm convinced that the local
carrier
> is not sending CLID across the circuit.
>
> Brian
>
> -----Original Message-----
> From: Yinka Daramola [mailto:o_daramola@hotmail.com]
> Sent: Tuesday, April 08, 2003 11:10 PM
> To: Brian Sims; ccielab@groupstudy.com
> Subject: Re: IP Telephony Caller-ID problems
>
>
> There could be a number of things wrong with this setup ranging from IOS
> version to signalling voltage. If you're not in the US, you may be having
> common the cptone setting issue, which defualts to "us" and "northamerica"
> for 2600/3600 and MC3810 respectively. The link below should help you
> troubleshoot the problem in a step-by-step manner.
>
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guid
> e09186a008009cc4b.html#1049184
>
> Yinka Daramola
> CCNA, CCNP, MCSE, RHCE,CCIE#11331
> Network Consultant
> Red Hat Inc.
> Tel: 425-827-4498
>
> ----- Original Message -----
> From: "Brian Sims" <BSims_1@msn.com>
> To: "boby2kusa" <boby2kusa@hotmail.com>; <ccielab@groupstudy.com>
> Sent: Tuesday, April 08, 2003 6:13 PM
> Subject: Re: IP Telephony Caller-ID problems
>
>
> > There is a CallManager and Cisco Unity server. The VG200 is a H323
> gateway
> > at every location.
> > ----- Original Message -----
> > From: "boby2kusa" <boby2kusa@hotmail.com>
> > To: "Brian Sims" <BSims_1@msn.com>; <ccielab@groupstudy.com>
> > Sent: Tuesday, April 08, 2003 11:35 AM
> > Subject: Re: IP Telephony Caller-ID problems
> >
> >
> > > Not enough information. is there a call manager? Is vg200 a H.323 or
> > MGCP
> > > gateway?
> > > ----- Original Message -----
> > > From: "Brian Sims" <BSims_1@msn.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Monday, April 07, 2003 6:44 PM
> > > Subject: IP Telephony Caller-ID problems
> > >
> > >
> > > > Hi,
> > > >
> > > > I have the daily duties of implementing voice networks of about 40
> > phones
> > > per
> > > > install. I am using a VG200 for the voice gateway. I have enabled
> > > caller-id
> > > > on my voice ports and the local telephone carrier is sending
caller-id
> > > across
> > > > their analog line but I'm still not getting any caller information
> from
> > an
> > > > outside caller. Anybody have any ideas? I have attached a copy of
> the
> > > VG200
> > > > configs to this email. Thanks in advance.
> > > >
> > > > Brian
> > > >
> > > > version 12.1
> > > > no service single-slot-reload-enable
> > > > no service pad
> > > > service timestamps debug datetime msec localtime
> > > > service timestamps log datetime msec localtime
> > > > !
> > > > hostname Flowers-ES-vg200
> > > > !
> > > > logging rate-limit console 10 except errors
> > > > no logging console
> > > > enable secret 5 $1$72BH$38oMBaKLMFhiNS2l6PEbW/
> > > > !
> > > > ip subnet-zero
> > > > no ip finger
> > > > !
> > > > no mgcp timer receive-rtcp
> > > > call rsvp-sync
> > > > !
> > > > !
> > > > interface FastEthernet0/0
> > > > ip address 10.195.0.10 255.255.0.0
> > > > no ip route-cache
> > > > no ip mroute-cache
> > > > duplex auto
> > > > speed auto
> > > > !
> > > > ip default-gateway 10.195.0.1
> > > > ip classless
> > > > ip route 0.0.0.0 0.0.0.0 10.195.0.1
> > > > no ip http server
> > > > !
> > > > voice-port 1/0/0
> > > > !
> > > > voice-port 1/0/1
> > > > !
> > > > voice-port 1/1/0
> > > > connection plar 25002
> > > > description 260-1015
> > > > caller-id enable
> > > > !
> > > > voice-port 1/1/1
> > > > connection plar 25002
> > > > description 260-1047
> > > > caller-id enable
> > > > !
> > > > dial-peer voice 1 pots
> > > > destination-pattern 9T
> > > > port 1/1/0
> > > > !
> > > > dial-peer voice 2 pots
> > > > destination-pattern 9T
> > > > port 1/1/1
> > > > !
> > > > dial-peer voice 100 voip
> > > > destination-pattern 250..
> > > > session target ipv4:10.5.0.11
> > > > dtmf-relay h245-alphanumeric
> > > > codec g711ulaw
> > > > no vad
> > > > !
> > > > line con 0
> > > > !
> > > > line aux 0
> > > > line vty 0 4
> > > > login
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3