Re: Multilink

From: Matt Nabors (mnabors@bcbsal.org)
Date: Thu Apr 10 2003 - 09:58:03 GMT-3


That is true. However, Cisco's BOD is outbound only, while multilink PPP is
in/out.

Matt :)

----- Original Message -----
From: "Glenn Goldie" <ggoldie2@lineone.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 10, 2003 3:42 AM
Subject: Re: Multilink

> I'm pretty sure it is possible,
>
> I thought when you type just dialer-load threshold command to bind two B
> channels into one logical channel you are using cisco proprietary
> Bandwidth On Demand. With ppp multilink command then it changes to using
> PPP Multilink specifications (which should mean compatibility with
> non-cisco vendor equipment).
>
> I got this from the CCNP Remote Access Exam Cert Guide, Pg 153.
>
>
> Rgds,
> Glenn.
>
>
>
> Hunt Lee wrote:
>
> >Hi Tom,
> >
> >Don't think that is possible.
> >
> >Regards,
> >Hunt
> >
> >
> >-----Original Message-----
> >From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
> >Sent: Thursday, 10 April 2003 2:39 PM
> >To: ccielab@groupstudy.com
> >Subject: Multilink
> >
> >
> >Hi, group,
> >
> > Does it possible to use the dialer load-threshold
> >command withOUT the ppp multilink command?
> >
> >Thanks alot
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! BB is Broadband by Yahoo! http://bb.yahoo.co.jp/
>

==============================================================================
CONFIDENTIALITY NOTICE
This e-mail is intended for the sole use of the individual(s) to whom it is
addressed, and may contain information that is privileged, confidential and
exempt from disclosure under applicable law. You are hereby notified that any
dissemination, duplication, or distribution of this transmission by someone
other than the intended addressee or its designated agent is strictly
prohibited. If you receive this e-mail in error, please notify me immediately
by replying to this e-mail.
==============================================================================



This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3