From: Jason Cash (cash2001@swbell.net)
Date: Mon Apr 07 2003 - 23:09:32 GMT-3
I am trying to define a static mac-address under port security, but it
doesn't show up in the config nor as a static entry. What am I
missing?!
3550-1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
3550-1(config)#int f0/7
3550-1(config-if)#switchport port-security mac-address 0009.b769.5f00
3550-1(config-if)#^Z
3550-1#sh port-security add
Secure Mac Address Table
-------------------------------------------------------------------
Vlan Mac Address Type Ports Remaining Age
567 0009.b769.5f00 SecureDynamic Fa0/7 1440 (I)
-------------------------------------------------------------------
Total Addresses in System : 1
Max Addresses limit in System : 128
3550-1#sh port-security int f0/7
Port Security : Enabled
Port status : SecureUp
Violation mode : Shutdown
Maximum MAC Addresses : 1
Total MAC Addresses : 1
Configured MAC Addresses : 0
Sticky MAC Addresses : 0
Aging time : 1440 mins
Aging type : Inactivity
SecureStatic address aging : Enabled
Security Violation count : 0
3550-1#sh run | beg interface FastEthernet0/7
interface FastEthernet0/7
description R7 - F0/0
switchport access vlan 567
switchport mode access
switchport port-security
switchport port-security aging time 1440
switchport port-security aging type inactivity
switchport port-security aging static
no ip address
duplex full
speed 100
spanning-tree portfast
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:48 GMT-3