From: Jan-Willem Bouman (Cisco Systems) (jbouman@cisco.com)
Date: Sun Apr 06 2003 - 09:46:36 GMT-3
Did you use the auto-command ?
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080093ffe.shtml
JanWillem
At 12:47 04/06/2003, you wrote:
>Hi Group,
>
>I have tried examples in the archives but can't make it work.
>
>Here is the config:
>
>service hide-telnet-addresses
>ip host r2511 192.168.0.2
>
>busy-message r2511 ^C Busy-message for 2511 ^C
>
>The output:
>
>2511b#telnet r2511
>
>User Access Verification
>
>Password:
>Password:
>Password:
>% Bad passwords
>
>2511b#
>
>What is wrong with the config?
>
>Thank you in advance.
>
>Regards,
>
>Jeff
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:47 GMT-3