From: Brian Dennis (brian@labforge.com)
Date: Sat Apr 05 2003 - 23:38:40 GMT-3
Here is a configuration off a UBR924.
Rack12R1#wr t
Building configuration...
Current configuration : 1163 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Rack12R1
!
logging rate-limit console 10 except errors
enable secret 5 $1$91hV$/fT.VL.lK0.QnRbuBTmlQ.
!
ip subnet-zero
no ip finger
!
ip audit notify log
ip audit po max-events 100
call rsvp-sync
!
!
interface Ethernet0
ip address 172.16.3.101 255.255.255.0
no ip mroute-cache
!
interface cable-modem0
ip address docsis
no ip mroute-cache
shutdown
cable-modem voip clock-internal
bridge-group 59
bridge-group 59 spanning-disabled
!
router rip
version 2
network 172.16.0.0
!
ip classless
no ip http server
no ip http cable-monitor
!
snmp-server packetsize 4096
snmp-server manager
!
voice-port 0
input gain -2
!
voice-port 1
input gain -2
!
dial-peer voice 1 pots
destination-pattern 5271001
port 0
!
dial-peer voice 2 voip
destination-pattern 5271002
session target ipv4:172.16.3.102
!
!
line con 0
transport input none
line vty 0 4
login
!
end
Rack12R1#sho ver | in (IOS)|(bin)
IOS (tm) 920 Software (UBR920-K1K2O3V4Y5-M), Version 12.1(5)T14,
RELEASE SOFTWARE (fc1)
System image file is "flash:ubr920-k1k2o3v4y5-mz.121-5.T14.bin"
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Yee
Sent: Saturday, April 05, 2003 3:49 PM
To: Brian Dennis; Aldo; ccielab@groupstudy.com
Subject: RE: preparation for voice-related stuff
Can these be hooked up back to back to simulate remote dial peers?
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: Saturday, April 05, 2003 12:57 PM
To: 'Aldo'; ccielab@groupstudy.com
Subject: RE: preparation for voice-related stuff
You could also look into getting a couple UBR924s. They are about $55
each on eBay brand new. You can run the latest IOS on them and they have
two FXS ports.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Aldo
Sent: Saturday, April 05, 2003 12:54 AM
To: ccielab@groupstudy.com
Subject: preparation for voice-related stuff
Hi All,
I heard someone suggesting that it is cheaper to purchase Cisco 3810
instead of the 26xx/36xx + FXS ports.
What are exactly the required components to have voice in the home lab?
Thanks in advance for your advice.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:47 GMT-3