From: Robert Yee (robert@bluespud.com)
Date: Sat Apr 05 2003 - 20:48:50 GMT-3
Can these be hooked up back to back to simulate remote dial peers?
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: Saturday, April 05, 2003 12:57 PM
To: 'Aldo'; ccielab@groupstudy.com
Subject: RE: preparation for voice-related stuff
You could also look into getting a couple UBR924s. They are about $55
each on eBay brand new. You can run the latest IOS on them and they have
two FXS ports.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Aldo
Sent: Saturday, April 05, 2003 12:54 AM
To: ccielab@groupstudy.com
Subject: preparation for voice-related stuff
Hi All,
I heard someone suggesting that it is cheaper to purchase Cisco 3810
instead of the 26xx/36xx + FXS ports.
What are exactly the required components to have voice in the home lab?
Thanks in advance for your advice.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:47 GMT-3