From: Teck PhrEAk!! (phreakinphunk@hotmail.com)
Date: Thu Apr 03 2003 - 03:13:54 GMT-3
just a waayyld thot on this one.......might actually work!
when u aggregate on r2....dont base the aggregate on the subnet of
150.50.200.0 i.e use advertise-map and deny network 150.50.200.0
aggregate on R2 using 150.50.200.0 255.255.255.0 summary-only advertise-map
phatdawg
route-map phatdawg
match ip address 7
access-list 7 deny 150.50.200.0 0.0.0.255
lemme know if it worked....cant check here....
cheers,
sumit.
>From: "Mr. Richard L. Pickard" <nettable_walker@attbi.com>
>Reply-To: "Mr. Richard L. Pickard" <nettable_walker@attbi.com>
>To: "Ram Shummoogum" <rshummoo@ca.ibm.com>, <ccielab@groupstudy.com>
>Subject: RE: BGP AS removal
>Date: Wed, 2 Apr 2003 19:55:56 -0600
>
>4/2/2003 8:00pm Wednesday
>
>Can you send over the whole config ?
>
>Richard
>
>//
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Ram Shummoogum
>Sent: Wednesday, April 02, 2003 3:23 PM
>To: ccielab@groupstudy.com
>Subject: BGP AS removal
>
>
>150.50.200.0(R1)----(R2)------(R3).
>
>R1 belongs to AS1
>R2 belongs to AS2
>R3 belongs to AS3
>
>I inject 150.50.200.0 using the network command on R1 and see 150.50.200.0
>in R3 with as_path of 2 1.
>
>The question is how can I remove the 1 from the As Path on R3.
>
>I have tried using the network command on R2 with no success.
>If I aggregate on R2 using 150.50.200.0 255.255.255.0 summary-only , I
>will still see 150.50.200.0 with as-path 2 1 ( no change).
>However, if I aggregate on R2 using 150.50.0.0 255.255.0.0 summary-only,
>then I will see 150.50.0.0 with as-path 2. The question was to get
>150.50.200.0 and not 150.50.0.0.
>
>I can't get the 150.50.200.0 to work.
>
>
>Thank you.
>
>RAM
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3