From: Berry Mobley (MobleyB@bellsouth.net)
Date: Thu Apr 03 2003 - 01:26:01 GMT-3
>Hmmm...could be a bad console port, too - but getting the break sent would
>disprove that...
>
>Berry
>
>At 09:43 PM 4/2/2003 -0500, you wrote:
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> > Behalf Of Charles T. Alexander
>> > Sent: Wednesday, April 02, 2003 5:03 PM
>> > To: ccielab@groupstudy.com
>> > Subject: 2501 Boot problem ?
>> >
>> >
>> > I just bought another 2501. When I go to boot it stops at
>> > Would you like to enter the initial configuration dialog? [yes]:
>> >
>> > I enter y or n and it goes no where. Any suggestions
>>
>>
>>Make sure the config register isn't set to something weird.
>>
>>1. Cold boot the router and enter a break sequence to get into boot ROM
>>mode.
>>
>>2. >o/r 0x2102 [set config register to normal]
>>
>>3. >i [initialize or reboot the router]
>>
>>BTW, you might want to update your boot ROMs to the latest version -
>>yours are pretty old. Same goes for your IOS.
>>
>>HTH.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3