From: Mohamed, Liban [CC] (Liban.Mohamed@mail.sprint.com)
Date: Wed Apr 02 2003 - 12:09:49 GMT-3
Can you send your config. When you type show ip bgp a.b.c.d you should see a
result. either negitive and positive
see result here
route-server>sh ip bgp 144.228.0.0
BGP routing table entry for 144.228.0.0/16, version 314069
Paths: (3 available, best #3)
Not advertised to any peer
17233 7018 1239, (received & used)
12.129.192.2 from 12.129.192.2 (12.129.192.2)
Origin IGP, localpref 100, valid, external
Community: 7018:5000 17233:666 17233:1002 17233:7018
17233 701 1239, (received & used)
199.106.200.1 from 199.106.200.1 (199.106.200.1)
Origin IGP, localpref 100, valid, external
17233 7018 1239, (received & used)
12.129.192.1 from 12.129.192.1 (12.129.192.1)
Origin IGP, localpref 100, valid, external, best
Community: 7018:5000 17233:666 17233:1001 17233:7018
route-server>sh ip bgp 10.10.10.10
% Network not in table
-----Original Message-----
From: Connie Nie [mailto:CNie@EPLUS.com]
Sent: Tuesday, April 01, 2003 8:28 PM
To: 'ccie1@hotmail.com'; ccielab@groupstudy.com
Subject: RE: can not show specific route in BGP
BGP is configured and fully functioning. Show ip bgp will show the routes,
but to see more details, I need to be able to type in the specific ip
prefix, but somehow I couldn't do that on a few routers.
Connie
-----Original Message-----
From: ccie1@hotmail.com [mailto:ccie1@hotmail.com]
Sent: Tuesday, April 01, 2003 1:09 AM
To: Connie Nie; ccielab@groupstudy.com
Subject: Re: can not show specific route in BGP
connie:
do you have BGP configured when typing the command? Are your neighbor
relationships up? if not try that first then look at the command.
----- Original Message -----
From: "Connie Nie" <CNie@EPLUS.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 1:03 PM
Subject: can not show specific route in BGP
> Hi, there!
>
> I hope some of you might have seen this before---this is driving me
> absolutely insane. I can't seem to do a "show ip bgp a.b.c.d" on some of
my
> routers. They are running 12.1(18), and 12.1(14). On most other routers
> which are running exact same version of IOS, it works fine. On a side
note,
> this is NOT an observation of the April fools. -:-) It really behaves like
> this.
> Any idea?
>
> Thanks.
> Connie
> --------------
> security_R5#sh ip bgp ?
> community Display routes matching the communities
> community-list Display routes matching the community-list
> dampened-paths Display paths suppressed due to dampening
> filter-list Display routes conforming to the filter-list
> flap-statistics Display flap statistics of routes
> inconsistent-as Display only routes with inconsistent origin ASs
> ipv4 Address family
> neighbors Detailed information on TCP and BGP neighbor
connections
> paths Path information
> peer-group Display information on peer-groups
> quote-regexp Display routes matching the AS path "regular
expression"
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> vpnv4 Display VPNv4 NLRI specific information
> | Output modifiers
> <cr>
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3