From: Chepuri Roshan (roshanc@cisco.com)
Date: Wed Apr 02 2003 - 12:09:44 GMT-3
This is from the DOC CD.
"If you also have a BGP peering session with this MSDP peer, you should use
the same IP address for MSDP as you do for BGP"
Can you try that?
At 03:57 AM 4/2/2003 +0000, Tarun Pahuja wrote:
>Group,
>
>I haveRP's in 2 different Autonomus systems. I configured MSDP between
>the two so that they could exchange RP information. For some reason, I am
>unable to get them to exchange information eventho they are in connected
>state and exchanging messages, any ideas??
>
>R1(AS1)-------------------------------------------------R2(AS2)
>
>R1 in AS1
>
>router bgp 1
> no synchronization
> neighbor 172.16.1.2 remote-as 2
> neighbor 172.16.1.2 update-souce loopback 0
>
>ip msdp peer 2.2.2.2 connect-source Loopback0
>ip msdp sa-request 2.2.2.2
>
>R2 in AS2
>
>router bgp 2
>no synchronization
> neighbor 172.16.1.1remote-as 2
> neighbor 172.16.1.1Update-souce loopback 0
>
>ip msdp peer 1.1.1.1 connect-source Loopback0
>ip msdp sa-request 1.1.1.1
>
>------------------------------------------------------------------------
>
>MSN 8 with e-mail virus protection service: 2 months FREE*
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3