From: Jake Reynolds (JREYNOLDS@uscentral.org)
Date: Wed Apr 02 2003 - 11:16:13 GMT-3
I don't belive that CQ has a priority queuing function. Queue 0 is
just the first queue that is serviced. Adding the priority command to
a class in a policy-map enables LLQ for that class and that's not what
we want here.
Jake Reynolds
Systems Engineer - Information Systems
CCIE #11224, MCSE NT4 & W2K, CCNA, CCNP, A+
US Central Credit Union
9701 Renner Blvd.
Lenexa, KS 66219
Office- 913.227.6122
Cell- 816.305.6785
-----Original Message-----
From: FATHALLAH [mailto:sfathallah@mail.cbi.net.ma]
Sent: Wednesday, April 02, 2003 3:54 AM
To: Jake Reynolds
Cc: Ccielab
Subject: RE: How to convert Custom-Q to CBWFQ
Ok this the implementation way. but don't forget that telnet has been
affected to queue 0 witch is the most priority queue. so to convert
this in CBWFQ you must configure the class of the telnet with "
priority " commande witch need you to give the bandwith in KBs and not
the percentage.
Said FATHALLAH
-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com]De la part de
Jake Reynolds Envoyi : mardi 1 avril 2003 14:55 @ :
ccielab@groupstudy.com Objet : RE: How to convert Custom-Q to CBWFQ
Just add the byte counts together and divide each value by the total.
This gives you bandwidth percentages for each protocol. Then make
class-maps matching each protocol. Create a policy-map and enter the
classes with the appropriate bandwidth percentages. Also don't forget
the queue depth of 100 packets. Then of course apply the policy-map to
an interface with the service-policy [input | output] command.
Jake Reynolds
Systems Engineer - Information Systems
CCIE #11224, MCSE NT4 & W2K, CCNA, CCNP, A+
US Central Credit Union
9701 Renner Blvd.
Lenexa, KS 66219
Office- 913.227.6122
Cell- 816.305.6785
-----Original Message-----
From: Scot Peter [mailto:scotsman@rediffmail.com]
Sent: Tuesday, April 01, 2003 7:48 AM
To: ccielab@groupstudy.com
Subject: How to convert Custom-Q to CBWFQ
Hello Group,
I have already posted a question on this topic, but no answers yet...
so posting again... I want to convert the below Custom Queue to CBWFQ.
How can I do it. Please put your suggestions.
queue-list 1 protocol telnet 0
queue-list 1 protocol ftp 1
queue-list 1 default 2
queue-list 1 queue 0 byte-count 1000 limit 100
queue-list 1 queue 1 byte-count 1000 limit 100
queue-list 1 queue 2 byte-count 2000 limit 100
int s0
custom-queue-list 1
Warm regards
Scot
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3