From: Jonathan V Hays (jhays@jtan.com)
Date: Wed Apr 02 2003 - 01:25:48 GMT-3
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Scott M. Livingston
> Sent: Tuesday, April 01, 2003 4:42 PM
> To: ccielab@groupstudy.com
> Subject: autocommand
>
>
> Friend just called me and asked me how to leverage the
> autocommand so that when a locally configured user logs in
> they go straight to his menu he setup.
>
> So user logs in at priv lev 1 w/ a locally configured uid /
> pswd, but they do not go to the menu he has setup. His alias
> for the menu works fine; you type 'menu1' from the router>
> prompt and it goes straight there, but when the user logs in
> they have to type out the command which is NOT what he wants.
>
> He has set the following up, but it is not working for him.
>
> Username TEST password cisco
> Username TEST autocommand menu1
>
>
> Sorry if I did a bad job explaining this, for I have never
> set this up before and I don't have the config's -
> non-disclosure has not been signed yet.
>
> Thanks for any help you can provide!
>
> Scott
>
The second line is missing the keyword "menu" so it should be:
Username TEST autocommand menu menu1
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3