From: Jake Reynolds (JREYNOLDS@uscentral.org)
Date: Tue Apr 01 2003 - 11:54:41 GMT-3
Just add the byte counts together and divide each value by the total.
This gives you bandwidth percentages for each protocol. Then make
class-maps matching each protocol. Create a policy-map and enter the
classes with the appropriate bandwidth percentages. Also don't forget
the queue depth of 100 packets. Then of course apply the policy-map to
an interface with the service-policy [input | output] command.
Jake Reynolds
Systems Engineer - Information Systems
CCIE #11224, MCSE NT4 & W2K, CCNA, CCNP, A+
US Central Credit Union
9701 Renner Blvd.
Lenexa, KS 66219
Office- 913.227.6122
Cell- 816.305.6785
-----Original Message-----
From: Scot Peter [mailto:scotsman@rediffmail.com]
Sent: Tuesday, April 01, 2003 7:48 AM
To: ccielab@groupstudy.com
Subject: How to convert Custom-Q to CBWFQ
Hello Group,
I have already posted a question on this topic, but no answers
yet... so posting again...
I want to convert the below Custom Queue to CBWFQ. How can I do
it. Please put your suggestions.
queue-list 1 protocol telnet 0
queue-list 1 protocol ftp 1
queue-list 1 default 2
queue-list 1 queue 0 byte-count 1000 limit 100
queue-list 1 queue 1 byte-count 1000 limit 100
queue-list 1 queue 2 byte-count 2000 limit 100
int s0
custom-queue-list 1
Warm regards
Scot
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:44 GMT-3