From: Brian Dennis (brian@labforge.com)
Date: Tue Apr 01 2003 - 11:28:23 GMT-3
Rack4R4#deb frame pack
Frame Relay packet debugging is on
Rack4R4#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack4R4(config)#int s0/0
Rack4R4(config-if)#en frame
Rack4R4(config-if)#no shut
5d19h: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up
Rack4R4(config)#int s0/0.1 mu
5d19h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,
changed state to up
Rack4R4(config-subif)#ip add 10.1.1.4 255.255.255.0
Rack4R4(config-subif)#frame-relay interface-dlci 401
Rack4R4(config-fr-dlci)#^Z
Rack4R4#
5d19h: Serial0/0.1(o): dlci 401(0x6411), pkt encaps 0x0300 0x8000 0x0000
0x806 (ARP), datagramsize 34
5d19h: FR: Sending INARP Request on interface Serial0/0.1 dlci 401 for
link 7(IP)
5d19h: broadcast dequeue
5d19h: Serial0/0.1(o):Pkt sent on dlci 401(0x6411), pkt encaps 0x300
0x8000 0x0 0x806 (ARP), datagramsize 34
Rack4R4#
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ciscolab
Sent: Tuesday, April 01, 2003 3:00 AM
To: ccielab@groupstudy.com
Subject: Inverse ARP for Frame-relay multopoint subinterface
Hello, All,
The default status of inverse ARP on Frame-relay multopoint
subinterface is on , or off ?
!!!!!!!!!!!!!!!!Ciscolab
!!!!!!!!!!!!!!!!ciscolab@vip.sina.com
!!!!!!!!!!!!!!!!!!!!2003-04-01
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:44 GMT-3