From: Dustin.Yates@ercgroup.com
Date: Fri Mar 28 2003 - 20:43:04 GMT-3
This should have been straight forward, but.... Here's the hardware:
6509 (native mode IOS) ---- 4006 (CatOS) --- 3620 --- PC via crossover cable
The 6509 has other 6509's & 4006's hanging off of it with the WAN routers
tied to those. Mutlicast traffic is running throughout the network and is
seen on the PCs connected to the 4006 that the 3620 is connected to. Here's
the config on the 3620 (the PC is connected to FA1/0) and the "show ip
mroute 239.192.1.101" for a test stream:
ip multicast-routing
!
interface Loopback0
ip address 1.1.254.1 255.255.255.255
ip pim sparse-dense-mode
no ip mroute-cache
!
interface FastEthernet0/0
description Connection to 4006
ip address 1.1.1.1 255.255.252.0
ip pim sparse-dense-mode
!
interface FastEthernet1/0
description Connection to PC
ip address 1.1.4.1 255.255.255.252
ip pim sparse-dense-mode
ip multicast ttl-threshold 16
!
router eigrp 1
network 1 .0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
ip pim bidir-enable
ip pim rp-address 1.1.1.1
ip pim send-rp-announce Loopback0 scope 15
ip pim send-rp-discovery scope 15
!
!
sh ip mroute 239.192.1.101
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report
Outgoing interface flags: H - Hardware switched
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.192.1.101), 00:01:32/00:02:59, RP 3.177.200.254, flags: S
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
FastEthernet0/0, Forward/Sparse-Dense, 00:00:55/00:02:34
(3.115.80.220, 239.192.1.101), 00:01:32/00:01:27, flags: PX
Incoming interface: FastEthernet0/0, RPF nbr 3.177.140.17
Outgoing interface list: Null
(3.177.36.245, 239.192.1.101), 00:00:39/00:02:59, flags: PTX
Incoming interface: FastEthernet0/0, RPF nbr 3.177.140.17
Outgoing interface list: Null
(3.177.137.220, 239.192.1.101), 00:00:12/00:02:47, flags: PX
Incoming interface: FastEthernet0/0, RPF nbr 3.177.140.17
Outgoing interface list: Null
When I connect the PC to the 4006 that the 3620 is connected to, I get the
stream. But, I can't get it across the 3620. Any suggestions?
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:46 GMT-3