From: CCIE FUN (ccieexam2002@yahoo.com)
Date: Fri Mar 28 2003 - 12:29:51 GMT-3
also debug frame lmi on both routers would be good.
--- Larry Letterman <lletterm@cisco.com> wrote:
> your frame switching is kind of confusing..your
> using the same dlci number for
> two routers...I suppose it may work, but I used
> different dlci's for my routers in the frame
> switch...
>
> do a 'sh frame-relay map' and see what is mapped to
> the dlci's..
>
> Larry Letterman
> Network Engineer
> Cisco Systems
>
>
> ----- Original Message -----
> From: Justin M. Ramsey
> To: ccielab@groupstudy.com
> Sent: Thursday, March 27, 2003 7:06 PM
> Subject: Frame-relay / IP assistance
>
>
> I am having a problem with my Frame-relay set up
> and I think Ibm just
> missing some little thing that I continually
> overlook, hope you guys can
> help me. I have a lab set up with a frame-relay
> switch going to 4
> routers, I will only deal with 2 to keep this as
> short as possible. I
> can not ping any interfaces in this lab, but I can
> show cdp neighbors
> and see all the neighbors, show cdp neighbors
> detail and see their IP
> addresses and my show frame-relay pvc looks good
> toob&here is the output
> of R1bs show frame-relay PVC:
>
> PVC Statistics for interface Serial0 (Frame Relay
> DTE)
>
> Active Inactive Deleted
> Static
> Local 3 0 0
> 0
> Switched 0 0 0
> 0
> Unused 0 0 0
> 0
>
> DLCI = 16, DLCI USAGE = LOCAL, PVC STATUS =
> ACTIVE, INTERFACE =
> Serial0.16
>
> input pkts 370 output pkts 9501
> in bytes
> 88438
> out bytes 585778 dropped pkts 0
> in FECN pkts
> 0
> in BECN pkts 0 out FECN pkts 0
> out BECN
> pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 9501 out bcast bytes 585778
> pvc create time 05:15:11, last time pvc status
> changed
> 04:53:45
>
> DLCI = 17, DLCI USAGE = LOCAL, PVC STATUS =
> ACTIVE, INTERFACE =
> Serial0.17
>
> input pkts 309 output pkts 9199
> in bytes
> 87078
> out bytes 491882 dropped pkts 0
> in FECN pkts
> 0
> in BECN pkts 0 out FECN pkts 0
> out BECN
> pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 9199 out bcast bytes 491882
> pvc create time 05:13:36, last time pvc status
> changed
> 04:54:33
>
> DLCI = 18, DLCI USAGE = LOCAL, PVC STATUS =
> ACTIVE, INTERFACE =
> Serial0.18
>
> input pkts 292 output pkts 9237
> in bytes
> 80306
> out bytes 566181 dropped pkts 0
> in FECN pkts
> 0
> in BECN pkts 0 out FECN pkts 0
> out BECN
> pkts 0
> in DE pkts 0 out DE pkts 0
> out bcast pkts 9237 out bcast bytes 566181
> pvc create time 05:13:55, last time pvc status
> changed
> 04:47:57
>
> Here is the show cdp neighbors detail command on
> that same
> router for the R3 router:
>
> Device ID: R3
> Entry address(es):
> IP address: 10.10.16.2
> Platform: cisco 2500, Capabilities: Router
> Interface: Serial0.16, Port ID (outgoing port):
> Serial0.16
> Holdtime : 146 sec
>
> Version :
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-INS-L), Version
> 12.0(22), RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Tue 02-Apr-02 00:40 by srani
>
> advertisement version: 1
>
> This is the debug ip packet output when pinging
> from R1:
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.10.16.2,
> timeout is 2
> seconds:
>
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, sending.
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, encapsulatio
> n failed
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, sending.
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, encapsulatio
> n failed
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, sending.
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, encapsulatio
> n failed
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, sending.
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, encapsulatio
> n failed
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, sending.
> Success rate is 0 percent (0/5)
> R1#
> 1w2d: IP: s=10.10.16.1 (local), d=10.10.16.2
> (Serial0.16), len
> 100, encapsulatio
> n failed
>
> This is the debug frame-relay packet output when
> pinging from
> R1:
>
> gramsize 45
> 1w2d: Serial0(i): dlci 17(0x411), pkt encaps
> 0x0300 0x8000
> 0x0000 0x2000(CDP), d
> atagramsize 292
> 1w2d: Serial0.16: broadcast search
> 1w2d: Serial0.16(o): dlci 16(0x401), pkt type
> 0x300,
> datagramsize 44
> 1w2d: bridged dest ffff.ffff.ffff, src
> 0000.0c3f.2be8,
> type 806
> 1w2d: Serial0.16: broadcast search
> 1w2d: Serial0.16(o): dlci 16(0x401), pkt type
> 0x300,
> datagramsize 52
> 1w2d: bridged dest ffff.ffff.ffff, src
> 0000.0c3f.2be8,
> type 806
> 1w2d: Serial0.17: broadcast search
> 1w2d: Serial0.17(o): dlci 17(0x411), pkt type
> 0x300,
> datagramsize 44
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:46 GMT-3