From: Jonathan V Hays (jhays@jtan.com)
Date: Fri Mar 28 2003 - 10:23:37 GMT-3
As you say, it is confusing but the DLCI number is not an issue. But as
configured on his switch, the DLCI is locally significant so using the
same DLCI on every interface on the switch works just fine.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Larry Letterman
> Sent: Friday, March 28, 2003 3:50 AM
> To: Justin M. Ramsey; ccielab@groupstudy.com
> Subject: Re: Frame-relay / IP assistance
>
>
> your frame switching is kind of confusing..your using the
> same dlci number for two routers...I suppose it may work, but
> I used different dlci's for my routers in the frame switch...
>
> do a 'sh frame-relay map' and see what is mapped to the dlci's..
>
> Larry Letterman
> Network Engineer
> Cisco Systems
>
>
> ----- Original Message -----
> From: Justin M. Ramsey
> To: ccielab@groupstudy.com
> Sent: Thursday, March 27, 2003 7:06 PM
> Subject: Frame-relay / IP assistance
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3