From: Hunt Lee (huntl@webcentral.com.au)
Date: Fri Mar 28 2003 - 00:10:54 GMT-3
Hi Donny,
True. You are right ;)
Sorry, OhioHondo!!!
Regards,
Hunt
-----Original Message-----
From: Donny MATEO [mailto:donny.mateo@sg.ca-indosuez.com]
Sent: Friday, 28 March 2003 1:10 PM
To: Hunt Lee
Cc: 'ccielab@groupstudy.com'
Subject: RE: how to set interface sc0 in 3550 like in 5000?
How would you like a switch that keep doing broadcast for every MAC addres
that is not on his CAM table ?
Doesnt' sound good to me.
Donny
Hunt Lee
<huntl@webcentral To: "'OhioHondo'"
<ohiohondo@columbus.rr.com>
.com.au> cc:
"'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
Sent by: Subject: RE: how to set
interface sc0 in 3550 like in 5000?
nobody@groupstudy
.com
28-03-2003 09:16
Please respond to
Hunt Lee
Hey OhioHondo,
Can I ask what is the purpose of this default route?
I always assume that if the 3550 is in pure L2 (with "no ip routing"), then
the switch can get out to the rest of the network automatically by
proxy-arp.
Or am I completely off?
Regards,
Hunt
-----Original Message-----
From: OhioHondo [mailto:ohiohondo@columbus.rr.com]
Sent: Friday, 28 March 2003 3:08 AM
To: Mike Williams; 'Fan Shan'; 'Ccielab@Groupstudy.Com'
Subject: RE: how to set interface sc0 in 3550 like in 5000?
Don't forget to set a default route also. (ip route 0.0.0.0 0.0.0.0 x.x.x.x)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mike Williams
Sent: Thursday, March 27, 2003 10:12 AM
To: 'Fan Shan'; 'Ccielab@Groupstudy.Com'
Subject: RE: how to set interface sc0 in 3550 like in 5000?
Fan,
There isn't an sc0 interface. Assumming your're communicating with the
switch on VLAN 1, just go into VLAN 1 interface and give it an IP
address and do a 'no shut' and you should be able to communicate with
this switch via IP now.
HTH,
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Fan Shan
Sent: Thursday, March 27, 2003 4:10 AM
To: Ccielab@Groupstudy.Com
Subject: how to set interface sc0 in 3550 like in 5000?
how to set interface sc0 in 3550 like in 5000?
FanShan
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3