From: Teck PhrEAk!! (phreakinphunk@hotmail.com)
Date: Thu Mar 27 2003 - 01:17:36 GMT-3
hey George,
yes a 10/100 PORT can be used as a destination for a GigaBitEthernet port
...but be carefull this might cause congestion on the switch if there is too
much traffic coming from from the Giga.
yes...you can even monitor a Giga Trunk port which is destined to a 10/100
port. But as i said earlier.....watch out for congestion.
For furthur details....check out the CAT3550 Sofware Configuration Guide on
th Cisco Site.
Cheers,
Sumit
CCIE#11125
ccdp,ccnp,rhce,mcse,scsa,ibm e-biz Pro.
>From: "George Louis" <jlou>
>Reply-To: "George Louis" <jlouis08@yahoo.com>
>To: <ccielab@groupstudy.com>
>Subject: SPAN question
>Date: Wed, 26 Mar 2003 20:24:38 -0600
>
>Does anyone know if a 10/100 Fastethernet port can be a SPAN destination
>for a 1000MB Source port ?
>
>Slightly different questions:
>
>Does anyone know if a 10/100 Fastethernet port can be a SPAN destination
>for a 1000MB Source that is a Trunk port ?
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:45 GMT-3