From: ccie_studying (ccie_studying@hotmail.com)
Date: Tue Mar 25 2003 - 17:39:15 GMT-3
Mong:
First good luck to you. Cisco should provide you spid and dial string
information. Autodetect is the command to detect spid number, which could
not provide you translation between spid and dial string.
----- Original Message -----
From: "cmong" <cmong@telkom.net>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 25, 2003 7:58 AM
Subject: ISDN SPID
> Hello All,
>
> I have two days left to go but i still doubt about the
> SPID.
>
> Is there any rule to translate the SPID from a dial-number
> or any config that can do autodetect and enoug to rely on
> it ?
>
> r5(config-if)#isdn ?
> autodetect Enable the automatic spid
> detection
>
>
> I've read about the generic SPID format :
>
> NPA Nxx xxxx YY ZZ (14 digits)
> where:
> NPA: area code
> Nxx xxxx: dial number
> YY ZZ: optional number, where YY: shareing terminal id and
> ZZ: terminal id.
>
> is that what i have to follow or no way to translate the
> SPID, it have to be provided ?
>
> Thanks before hand !
>
> ~Mong
>
============================================================================
===============
> Malas antri buat mendapatkan print-out tagihan telepon ? Klik aja
http://billinfo2.plasa.com
> Gratis Perpanjangan dan Pendaftaran Nama Domain http://idc.plasa.com
khusus di bulan Maret !
>
============================================================================
===============
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:44 GMT-3