From: Neil G. Legada (nglegada@hotmail.com)
Date: Mon Mar 24 2003 - 03:00:11 GMT-3
Hello Group,
Anybody got this setup working ???
http://www.cisco.com/warp/customer/471/103.html
Need to test L2TP configuration but due to lack of resources, telephone
lines/modems etch, thought I'll have chance to test it anyway given the
setup .... but no luck until now.
I'm quite confused with the cablings being used. What I have right now are
these:
PCwin2k(com1)-->DB9/RJ45(terminal)-->straightcable-->RJ45/DB25(terminal)-->D
25/RJ45(modem)-->rolledcable-->Router(aux)
Do I have the correct combinations or I'm having it wrongly ???
The router is configured as follows:
!
interface Async129
ip unnumbered Ethernet0/0
encapsulation ppp
async mode interactive
peer default ip address pool DIALUP
ppp authentication chap
!
ip local pool DIALUP 10.0.100.1 10.0.100.10
!
line aux 0
login local
modem InOut
transport input all
autoselect during-login
autoselect ppp
stopbits 1
R1#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
* 0 CTY - - - - - 0 0
0 -
* 129 AUX 300/300 - inout - - - 0 0
0 -
130 VTY - - - - - 0 0
0 -
I would appreciate any comments and suggestions.
Thanks and kind regards,
-Neil
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:43 GMT-3