From: Sanfilippo, Ted (Ted.Sanfilippo@PaeTec.com)
Date: Fri Mar 21 2003 - 13:29:20 GMT-3
Try this under the sub-interface:
frame-relay interface-dlci 102 protocol ip 172.16.1.2
-----Original Message-----
From: Matthew Poole [mailto:matthew.poole@blueyonder.co.uk]
Sent: Friday, March 21, 2003 9:50 AM
To: ccielab@groupstudy.com
Subject: Autoinstall.
Hi,
I'm playing with autoinstall over frame relay and have successfully got it
to
get a config from a TFTP server on a remote subnet by adding an IP address
to
the Frame-relay map or dlci statement.
When I try to get it to obtain an IP address by bootp from the same server
my
router doesn't forward the requests. I know the helper address is correct
because it uses it for TFTP when the config includes the IP statements. I
tried specifying bootpc and bootps for forwarding, even though it shouldn't
be
needed but this didn't fix it.
Here's my configs and debug for an unsuccessful bootp request.
interface Serial0/0
no ip address
ip helper-address 192.168.1.255
ip directed-broadcast
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
no fair-queue
!
interface Serial0/0.1 point-to-point
ip address 172.16.1.1 255.255.255.0
ip helper-address 192.168.1.255
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 102
04:09:05: IP: s=0.0.0.0 (Serial0/0.1), d=255.255.255.255, len 328, rcvd 2
04:09:05: UDP src=68, dst=67
The docs are spot on when you specify an IP address - I thought this would
be
relatively simple. Has anybody got it to work using bootp to a subnet over
FR?
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:43 GMT-3