Re: bgp command

From: MADMAN (dmadlan@qwest.com)
Date: Fri Mar 21 2003 - 11:58:31 GMT-3

   Actually if you and your peer are running IOS 12.0T or > you don't
need or want soft-configuration in.

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087b3a.html

   Dave

Phong Tran Tien wrote:
> - use "show ip bgp neighbor x.x.x.x advertised-route" to view the routes advertised to neighbor
> - use "show ip bgp neighbor x.x.x.x received-route" to view the routes received from neighbor
> don't forget to enable soft-config (command: bgp neighbor x.x.x.x soft-configuration in"
>
> HTH
> CCIE #11285
>
>
> -----Original Message-----
> From: CCIE FUN [mailto:ccieexam2002@yahoo.com]
> Sent: Fri 3/21/2003 10:49 AM
> To: Richard Davidson; groupstudy
> Cc:
> Subject: Re: bgp command
>
>
>
> SHOW IP BGP
> is the command
>
>
> --- Richard Davidson <rich@myhomemail.net> wrote:
> > any one know a command to show what routes a bgp
> > router is sending and receiving. I think I remember
> > a
> > command like s ip bgp receive or advertise.
> > rich
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> http://platinum.yahoo.com
>
> 

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367

I would rather have a German division in front of me than a French one 
behind me."
--- General George S. Patton

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:43 GMT-3