From: Gerry Hilton (gerry.hilton@rogers.com)
Date: Thu Mar 20 2003 - 18:37:34 GMT-3
Hi. When tunnelling multicast through a tunnel, does ip pim
sparse-dense-mode have to be configured on the physical interfaces also?
The following passes with mrm, but router7 doesn't show an rp mapping.
Thanks.
Gerry
router2:
interface Tunnel27
ip address 17.17.17.2 255.255.255.0
ip pim sparse-dense-mode
ip mrm test-sender
tunnel source 200.0.0.2
tunnel destination 200.0.0.7
end
router7:
interface Tunnel17
ip address 17.17.17.7 255.255.255.0
ip pim sparse-dense-mode
ip mrm test-receiver
tunnel source 200.0.0.7
tunnel destination 200.0.0.2
end
router7-1750-2#sh ip pim rp map
PIM Group-to-RP Mappings
router7-1750-2#
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3