From: Sanfilippo, Ted (Ted.Sanfilippo@PaeTec.com)
Date: Thu Mar 20 2003 - 14:43:33 GMT-3
It doesn't matter which side has the "IP OSPF DEMAND-CIRCUIT" once the ISDN
circuits come up and negotiate OSPF, they will both be OSPF demand circuits.
Thats why you only need it on one side. ( thats how I understand it).
-----Original Message-----
From: Scot Peter [mailto:scotsman@rediffmail.com]
Sent: Thursday, March 20, 2003 9:36 AM
To: ccielab@groupstudy.com
Subject: IP OSPF DEMAND-CIRCUIT QUESTION
Hello group,
I have two Routers configured with OSPF as shown below. R2 is
configured for callback accept, where as R1 is requesting
Callback.
I am concerned about configuring "Ip ospf demand-circuit" on one
of the Routers. Which Router is the best to put Demand-circuit?
I am bit confused to configure demand circuit on R1 as it will not
hold the circuit after requesting the call; so please clarify my
question.
|----Frame-relay----|
R1| |R2
|----ISDN Backup----|
Thanks in advance
Pet.
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3