From: Voss, David (dvoss@heidrick.com)
Date: Thu Mar 20 2003 - 12:12:26 GMT-3
The Priority command is used with PQ-WFQ. It allows that traffic to take
the "fast track" established by the Priority statement you created creating
a Priority Queue within CBWFQ.
Read up on CBWFQ. Then read PQ-WFQ.
-----Original Message-----
From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
Sent: Wednesday, March 19, 2003 6:27 PM
To: ccielab@groupstudy.com
Subject: QOS Questions
What is the difference between:
Priority 100 versus Bandwidth 100 under the r1(config-pmap-c)# Mode ?
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3